Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Mechanical conversion of wood and wooden fittings
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL

Mosayeb Dalvand; Ghanbar Ebrahimi; Kambiz Pourtahmasi

Volume 32, Issue 2 , July 2017, , Pages 171-180

https://doi.org/10.22092/ijwpr.2017.109762

Abstract
  In this study effect of staple length (penetration length) and its number in connection, on withdrawal capacity in face and edge of laminated veneer lumber (LVL) out of poplar was investigated. In this investigation, the staple with 3 and 4 cm penetration length and staple with 3, 4 and 5 cm penetration ...  Read More

Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture

Mosayeb Dalvand; Ghanbar Ebrahimi; Mehdi Tajvidi; Mohammad Layeghi

Volume 28, SPRING 1 , March 2013, , Pages 11-24

https://doi.org/10.22092/ijwpr.2013.3069

Abstract
  The bending moment resistance under diagonal tensile load of doweled joint in plywood members was investigated. Joint members were cut from 11-ply hardwood plywood (Beech, Hornbeam and Alder) at the nominal thickness of19 mm. Dowels were made of Beech and Hornbeam woods. Dowel diameters (6, 8 and10 mm) ...  Read More